RELEASE NOTES

Firmware per NVR (46NVR.08PS)

Copyright (c) 2017 - 2018 Vimar s.p.A.
Web site:  http://www.vimar.com


License and Disclaimer
======================

CONTRATTO DI LICENZA VIMAR CON LUTENTE FINALE
VIMAR SPA con sede in Marostica (VI), Viale Vicenza n. 14 (http://www.vimar.com), unica proprietaria dei software relativi a questa nota di rilascio con il presente contratto concede in licenza d'uso i programmi sopraindicati.
VIMAR SPA declina ogni responsabilit per eventuali danni provocati dall'uso improprio dei programmi sopracitati, in particolare per danni diretti o indiretti a persone, cose e/o animali attinenti a perdite economiche che si verifichino in relazione all'uso del software.
VIMAR si riserva di apportare in qualsiasi momento, senza alcun preavviso, modifiche atte a migliorare la funzionalit del suddetto software.  vietata qualsiasi modifica, traduzione, adattamento e creazione di applicazioni basate sui software sopracitati, senza il preventivo consenso scritto di VIMAR.
L'utente dovr verificare la rispondenza del programma alle proprie esigenze interpretando criticamente i risultati per verificare le conseguenze delle scelte progettuali realizzate.
Tutti i rischi concernenti i risultati e le prestazioni del programma sono assunti dall'utente.
VIMAR SPA mantiene la propriet esclusiva del software.
 vietato effettuare copie non autorizzate del programma.
Non  consentito allutilizzatore modificare, tradurre, adattare, decompilare, disassemblare o creare applicazioni derivate dal programma.
L'Utilizzatore si impegna a non eliminare dal software alcuna informazione relativa al Copyright.
Il programma  protetto dalle leggi sul Copyright in vigore in Italia e previste dai trattati internazionali, pertanto, qualunque attivit realizzata in contrasto con quanto sopra espresso sar perseguita nelle opportune sedi.


VIMAR END-USER LICENSE CONTRACT
VIMAR SPA located in Marostica (VI), Viale Vicenza n. 14 (http://www.vimar.com), sole owner of the software relative to this release note, through this contract grants the license of use of the aforementioned programs.
VIMAR SPA shall not be held liable for any damage caused by improper use of  aforementioned software, in particular for direct or indirect damage to persons, property, and/or animals due to economic loss that may occur as a result of the use of the software.
VIMAR SPA reserves the right to make any changes to improve the function of the aforementioned software without advance notice. It is prohibited to modify, translate, adapt, or create applications based on aforementioned software, without previous written consent from VIMAR.
The user must verify the suitability of the program to his needs, and interpret the results to verify the consequences of the choices of design made.
All risks concerning the results and performance of the program are assumed by the user.
VIMAR SPA holds the exclusive property right of the software.
Unauthorized duplication of the program is prohibited.
It is expressly forbidden to modify, translate, fit, change, disassembly in any way or to create by-products from the software.
The user is to be held responsible not to eliminate any information of the software relevant to the Copyright.
The software are protected under the Copyright laws in force in Italy and foreseen by the International treaties, therefore, any activity realized in contrast with what is stated above, will be prosecuted at the right place.



==========================================================================================================================================================
= IT
==========================================================================================================================================================

Legenda:
   ! Risoluzione problema bloccante o legato alla sicurezza
   * Risoluzione problema importante
   + Nuova funzionalit o cambio
   - altre note

Classificazione malfunzionamenti:

Bloccante: il dispositivo si blocca, e non c' modo di aggirare il problema e recuperare la funzionalit

Critico: il dispositivo non si blocca ma la funzionalit non  disponibile

Importante: il dispositivo non si blocca, la funzione non  disponibile ma esiste un modo alternativo per ottenerla

Nuova funzionalit o cambio: nuova funzione o cambio di funzionalit che non ha impatto importante nel dispositivo


Dispositivi supportati
===================
- 46NVR.08PS


Storico Versioni
================

FW 1.4.10 (data rilascio 01/02/2024):
        + Invio immagine su notifica  Push 
        + Cambio modalit luce supplementare per telecamera deterrente
        + Attivazione/disattivazione  funzione di allarme luminoso e sonoro per telecamera deterrente
        + Schedulazione attivazione allarme luminoso e sonoro per telecamera deterrente
        + Aggiunto allarme luminoso e sonoro nella lista abilitazione/disabilitazione regole
        + Possibilit di abilitare lista regole anche con Box allarmi esterno 
        + Possibilit di attivazione telecamere 

FW 1.4.8 (data rilascio 07/07/2023):
        + Maggiore stabilit di funzionamento in casi specifici
	+ Nuova informativa sulla Privacy,allineata al web Vimar

FW 1.4.7 (data rilascio 09/01/2023):
	+ Aggiunta la ricerca efficiente per telecamere dotate di classificazione peculiare;
	+ Aggiunta la cancellazione selettiva per video e foto;
	+ Aggiunto laccesso al servizio Autonat.com anche per browser diversi da Explorer;
	+ aggiunta limpostazione per settare il Bitrate di registrazione del Sub-stream indipendentemente da Main-stream;
	+ Aggiunta la diagnosi con suggerimenti per lo stato dellHDD.

FW 1.4.6 (data rilascio 01/07/2022):
	+ Migliorata gestione da pagina WEB (no plug-in):
		+ Fino a 64 utenti in connessione
		+ Ricerca evento con anteprima immagini
		+ implementato Backup video da pagina web
	+ aggiunto formato MP4 per backup
	+ aggiunto play/pausa in riproduzione di anteprima
	+ aggiunta foto anteprima su lista eventi
	+ aggiunta generazione eventi di allarme da combinazione di funzioni (max. 2)
	+ aggiunto audio broadcast verso tutte le telecamere
	+ migliorata compatibilit RTSP di integrazione telecamere
	+ aumentati i parametri configurabili delle telecamere
	+ selezione automatica area geografica del servizio P2P
	+ aggiunta programmazione per servizio FTP
	+ aggiunta possibilit di viualizzazione data/ora in centro allo schermo
	+ aggiunto test di rete rapido verso le telecamere

FW 1.4.5 (data rilascio 28/06/2021):
	+ Implementata compatibilit vs browser diversi da Explorer senza la necessit di installare plug-in.
FW 1.4.4 :
	- Firmware base

Pre requisiti di sistema
===================
Versione firmware:
--------
FW 1.4.4

Versione hardware:
--------
73400030A0

Limitazioni
===================


Traduzioni
============

Italiano
Inglese




==========================================================================================================================================================
= EN
==========================================================================================================================================================

Legend:
   ! Security related bugfix or otherwise blocking or critical bugfix 
   * Important bugfix
   + New feature or Change
   - Other notes 

Bugs Classification:

Blocking: the program crash, the function is not available and there isnt any way to overcome the problem

Critical: the program does not crash but the function is not available

Important: the program does not crash, the function is not available but exists an operation sequence that overcome the problem and let the work continues

Feature or Change: behaviour that doesnt have a critical impact on the program run



Supported Vimar Items
===================
- 46NVR.08PS

Versions History
================

FW 1.4.10 (01/02/2024):
                 + Sending image on Push notification
                 + Changing additional light mode for deterrent camera
                 + Activation/deactivation of light and sound alarm function for deterrent camera
                 + Scheduling of light and sound alarm activation for deterrent camera
                 + Added light and sound alarm in the enable/disable rules list
                 + Possibility to enable rules list also with external alarm box
                 + Possibility of activating cameras

FW 1.4.8 (07/07/2023):
                  + Greater stability of operation in specific cases
	+ New privacy policy, aligned to the Vimar web

FW 1.4.7 (09/01/2023):
	+ Added efficient search for cameras with peculiar classification;
	+ Added selective deletion for videos and photos;
	+ Added access to the Autonat.com service also for browsers other than Explorer;
	+ added the setting to set the recording Bitrate of the Sub-stream independently from the Main-stream;
	+ Added diagnosis with hints for HDD status.


FW 1.4.6 (01/07/2022) :
	+ Improved management from WEB page (no plug-in):
		+ Up to 64 users in connection
		+ Event search with image preview
		+ implementation Backup video from web page
		+ added MP4 format for backup
	+ added play / pause in preview playback
	+ added preview photo on event list
	+ added generation of alarm events by combination of functions (max. 2)
	+ added audio broadcast to all cameras
	+ improved RTSP camera integration compatibility
	+ increased the configurable parameters of the cameras
	+ automatic selection of the geographical area of the P2P service
	+ added schedule for FTP service
	+ added possibility of displaying data / time in the center of the screen monitor
	+ added quick network test to cameras

FW 1.4.5 (28/06/2021) :
	+ Compatibility with browsers other than Explorer without the need to install plug-ins.

FW 1.4.4 :
	- Base Firmware


System Requirements
===================
Firmware version
--------
FW 1.4.4

hardware version:
--------
73400030A0


Program Limitations
===================



Translations
============
Italian
English





